Remarks
88
8
Access to the Machine
Place the machine near the power source, providing the clearance areas shown.
1. Rear: 6 cm (2.4") or more
2. Right: 1 cm (0.4") or more
3. Front: 75 cm (29.6") or more
4. Left: 1 cm (0.4") or more
Note
❒ For the required space when options are installed, contact your service repre-
sentative.
When Not Used for a Long Time
CAUTION:
Note the following:
• If the machine has not been used recently, it requires time to initialize so can-
not start printing immediately. Leave the machine switched on and wait
about ten minutes.
• For safety reason, unplug the power cord from the wall outlet if the machine
will not be used for an extended period of time such as holidays.
To Next Page
Loading...
Need help?
General