Changing the Paper Size
73
6
Changing a Paper Size in the Optional Paper Tray Unit (Tray 2)
This section describes how to change the size of paper loaded in the optional pa-
per tray unit.
A Make sure the paper tray is not in use.
B Pull the paper tray out slowly until it stops.
C Remove any remaining copy paper.
D While pinching the release levers, slide the end fence outward.
To load 8
1
/
4
"×14"L or 8
1
/
2
"×14"L size paper: pull the end fence out of the
tray and place it in the corner pocket on the left.
E While pressing the release lever, slide the side fence outward.
To Next Page
Loading...
Need help?
General