Adding Paper and Replacing Toner
66
6
Loading Paper into the Paper Trays
This procedure explains how to load paper into the paper trays.
A Pull the paper tray out slowly until it stops.
B Press the metal plate down until it clicks, and then square the paper and
load it in the tray.
Check that the top of the stack is not higher than the limit mark inside the
tray.
C Push the paper tray in until it stops.
Note
❒ The illustration above shows Tray 1.
❒ When using the optional paper tray unit (Tray 2), load paper flush against
the right side of the tray. Space between the paper and the tray's sides can
cause misfeeds.
Reference
p.70 “Changing the Paper Size”
ARK027S
ARK019S
To Next Page
Loading...
Need help?
General