Loading Paper
67
6
Orientation-Fixed Paper or Two-Sided Paper
This section describes loading paper that has a specified orientation and printing
side (such as letterhead paper).
Orientation-fixed (top to bottom) or two-sided paper (for example, letterhead
paper, prepunched paper, or copied paper) might not print correctly, depending
on how the originals and paper are placed. Select [On] in [Letterhead Setting] un-
der [Copier Features], and then place the original and paper as shown below. See
“Copier Features”, General Settings Guide.
When printing with the printer function, placing orientation is the same.
❖ Original Orientation
*1
When copying in this orientation using the duplex function, select [Always Specify]
in [Orientation] under [Copier Features] (User Tools). Place originals, and then select
as the original orientation.
*2
When copying in this orientation using the duplex function, and loaded paper ori-
entation is L, place originals as shown below:
Under [Copier Features], if [Orientation] is set to [Always Specify], load paper in
orientation.
Exposure glass ARDF
*1
*2
*1
To Next Page
Loading...
Need help?
General