Ricoh MP 402SPF User Manual

• When loading envelopes in the orientation, load them with flaps closed.
• Before loading envelopes, press down on them to remove any air from inside, flatten out all four
edges. If they are bent or curled, flatten their leading edges (the edge going into the machine) by
running a pencil or ruler across them.
• When loading envelopes, do not stack paper over the limit mark. If you squeeze extra envelopes
into the bypass tray, misfeeds might occur.
In copier mode
When copying onto envelopes, load them according to the applicable orientation shown below.
How to load envelopes
Orientation of
envelopes
Exposure glass Tray 1 Bypass tray
Side-opening
envelopes
• Flaps: closed
• Bottom side of
envelopes:
toward the front
of the machine
• Side to be
scanned: face
down
• Flaps: closed
• Bottom side of
envelopes:
toward the left of
the machine
• Side to be
scanned: face
down
• Flaps: closed
• Bottom side of
envelopes:
toward the left of
the machine
• Side to be
printed: face up
When loading envelopes, specify the envelope size and thickness. For details, see page 77
"Copying onto Envelopes".
In printer mode
When printing onto envelopes, load them according to the applicable orientation shown below:
9. Adding Paper and Toner
150

Ricoh MP 402SPF Specifications

General

Print Technology	Laser
Functions	Print, Copy, Scan, Fax
Maximum Print Resolution	1200 x 1200 dpi
Maximum Paper Capacity	1, 600 sheets
Duplex Printing	Yes
Scan Resolution	600 x 600 dpi
Fax Capability	Yes
Maximum Paper Size	A4
Warm-up Time	21 seconds
Memory (RAM)	2 GB
Fax Transmission Speed	33.6 Kbps
Copy Resolution	600 x 600 dpi
Operating System Compatibility	Windows, Mac OS, Linux
Connectivity	USB, Ethernet, Wi-Fi
Control Panel	Touchscreen
Mobile Printing	Yes
Hard Disk Drive	320 GB (Optional)
Network Connectivity	Ethernet
Print Speed	Up to 42 ppm (Letter)
Copy Speed	Up to 42 cpm (Letter)