5. Adjust the paper guides to close any gaps.
Do not move paper loaded in the tray more than a few millimeters.
Moving the loaded paper excessively may cause damage to paper edges on the openings of the
tray's lifting plate, resulting in sheets being folded or becoming jammed.
6. Lift the front side of the tray, and then slide it into the printer carefully until it stops.
To avoid paper jams, make sure the tray is securely inserted.
• Letterhead paper must be loaded in a specific orientation. For details, see page 67 "Loading
Orientation-Fixed Paper or Two-Sided Paper".
• You can load envelopes into Trays 2-4. Envelopes must be loaded in a specific orientation. For
details, see page 69 "Loading Envelopes".
2. Loading Paper
64
To Next Page
Loading...
