Ricoh P C600 User Manual

Message Cause Solution
"Exceeded max. print size.
Press [JobReset]."
The specified paper size exceeds
the maximum size supported by
this printer.
Press [JobReset] to cancel printing.
"Failed to connect to server
for Remote Diagnostics."
The printer cannot communicate
with Remote Communication
Gate.
Check the connection to the
Remote Server Gate.
"Independent-supply toner" Independent-supply toner is set. Use the toner recommended for
this printer.
"Independent-supply toner" The toner has run out. For details, see page 38
"Replacing the Print Cartridge".
"IPv6 Address already exists
Link-local
Address(109/209)"
The same IPv6 address is already
used.
Contact your network
administrator.
"IPv6 Address already exists
Stateless
Address(109/209)"
The same IPv6 address is already
used.
Contact your network
administrator.
"IPv6 Address already exists
Manual Config.
Address(109/209)"
The same IPv6 address is already
used.
Contact your network
administrator.
"Load paper in (tray name)" There is no paper in the specified
tray.
Load the specified paper in the
tray, or ress [JobReset] to reset the
job.
"Load paper in (tray name)" The tray is not inserted completely
into the machine.
Slide the tray into the machine
until it stops.
"Paper size mismatch." Paper of a size that is different
from the setting specified in [Paper
Size] under [Paper Input] is
loaded.
Load the paper of the size
specified in [Paper Size] under
[Paper Input] and press
[Continue], or press [Job Reset] to
cancel the job.
"Paper size mismatch." The tray is not inserted completely
into the machine.
Slide the tray into the machine
until it stops.
When Messages Are Displayed
83

Ricoh P C600 Specifications

General

Type	Original
Printing colors	Black
Quantity per pack	1 pc(s)
Built-in drum unit	-
Brand compatibility	Ricoh
Black toner page yield	18000 pages
Print technology	Laser printing

Weight and Dimensions

Package type	Box
Package weight	379 g