PCL6 Driver for Universal Print ver 4.0.0
Page 4 of 87
Version Issue Date Revisions
1.9.0 Sept. 13, 2010
Added Aficio SP C430DN/C431DN to the “Supported
Models > Specifications” section.
Added Aficio SP C430DN/C431DN to the “Generic Model”
section.
Modified the “Upgrading the driver” procedure.
Modified the “Upgrading the driver” section.
Added “Uninstalling the driver” section.
Added “Disabling bi-directional communication” section.
2.0.0 Mar. 30th, 2011
This document has been reclassified a “White Paper”
instead of a “Technical Information document”.
The PCL6 Driver for Universal Print version is now
ver.3.5.0.0.
Added the following models as being fully supported or
supported as “Generic model”:
Aficio MP C4501/C5501/C4501A/C5501A
Aficio MP C3001/C3501
Aficio MP C300/C300SR/C400/C400SR
Aficio MP C2051/C2551/C320DN
Added a “Scripting” section.
Added a “Point and Print” installation procedure.
Added a “Web Point and Print” installation procedure.
Added a “Plug and Play” installation procedure.
Added a reference to iPrint documentation.
Explained that the use of the PCL6 DRIVER FOR
UNIVERSAL PRINT with a server cluster is supported.
Explained that “Printer Driver Isolation” is supported.
2.1.0 June 14th, 2011
- Added Aficio MP 201 to the “Supported Models >
Specifications” section.
- Added Aficio MP 201 to the “Generic Model” section.
- Added information about the way the driver retrieves an
SNMP community name from a Novell iPrint server.
- General corrections throughout.
To Next Page
Loading...
