PCL6 Driver for Universal Print ver 4.0.0
Page 49 of 87
(*1) If the newer PCL6 driver for Universal Print doesn’t have the specific model’s file, the
Generic Model will be applied.
Resetting of the Settings in a File Might Occur
If the file, such as MS Office Excel, has the settings information (public Devmode) that uses PCL6
driver for Universal Print v3.13.0.0 or earlier, these settings might be reset or replaced with
default settings value.
Target settings include:
• Paper size
The affected size is only 148x200mm. This size might be replaced to 10"x14”.
• 2-sided
The value maintained by an application might be reset and the default value of PCL6
driver for Universal Print v4.x will be applied.
6-2-3 Upgrading an x86 Driver Installed As an "Additional Driver" on an x64 System
(and Vice Versa)
To replace an x86 print driver on an x64 server (and vice versa), the following should be done:
1. Open the Devices and Printers folder.
2. Select any print queue and open the Print Server Properties window.
3. Select the "Drivers" tab.
4. Click "Add" to install the new version of the x86 driver.
To Next Page
Loading...
Need help?
General
