Calling to Request a Message (Polling Reception)
7
1
File Reserve Report (Polling RX)
This report is printed after Polling Re-
ception has been set up.
You can check the date and time, Fax
Header, File No., Transmission con-
dition and the Other party's name
with this report.
Note
❒ You can turn this function on or off
with the User Parameters. See p.58
“User Parameters” (Switch03,
Bit3).
Communication Result Report
(Polling RX)
This report is printed after a Polling
Reception has been completed and
shows the result of the Polling Recep-
tion.
You can check the date and time, Oth-
er party's name and result with this
report.
Note
❒ You can also check the result of a
Polling Reception with the Journal.
❒ You can turn this function on or off
with the User Parameters. See p.58
“User Parameters” (Switch03,
Bit4).
StellaCEN-advanced_V4_FM.book Page 7 Tuesday, July 17, 2001 1:01 PM
To Next Page
Loading...
