Initial Scanner Setup
13
2
Selecting a custom size
When selecting [Custom Size] as the
scan size, follow the procedure be-
low.
A
AA
A
Select [Custom Size] on the Scan
Size screen using the scroll keys,
and then press the {
{{
{OK}
}}
} key.
B
BB
B
Enter the width of the original us-
ing the number keys.
Enter the value in Horiz., and then
press the {
{{
{OK}
}}
} or {
{{
{#}
}}
} key.
C
CC
C
Enter the height of the original
using the number keys.
Enter the value in Vert., and then
press the {
{{
{OK}
}}
} or {
{{
{#}
}}
} key.
The range of possible dimensions
for original sizes is as follows:
❖
❖❖
❖ When using the Auto Document
Feeder
• Original Size
Horiz.: 139 - 356 mm (5.5" -
14.0")
Vert.: 139 - 216 mm (4.2" -
8.5")
❖
❖❖
❖ When using the exposure glass
cover
• Original Size
Horiz.: 139 - 297 mm (5.5" -
11.6")
Vert.: 139 - 216 mm (4.2" -
8.5")
The “
Programmed
” message ap-
pears, and then the Scan Size
screen returns.
D
DD
D
Press the {
{{
{User Tools/Counter}
}}
} key.
Destination List Settings
This section explains how to set the
defaults for the destination list dis-
played.
The destination list settings consist of
the following. For the list about set-
tings and defaults, see p.9 “Scanner
Features”.
❖
❖❖
❖ Destination List Priority
Select a destination list to be dis-
played when the machine is in the
initial state. You can select either
[E-mail] or [Delivery Server].
❖
❖❖
❖ Update Server Dest. List
To update the Delivery Server Des-
tination List, press [Update Server
Dest. List].
Ordinarily, the Delivery Server
Destination List is automatically
updated. This function allows up-
dating at any time.
To Next Page
Loading...
