Maintaining Your Machine
61
5
Maintaining Your Machine
If the exposure glass, exposure glass
cover or document feeder (ADF)
white sheet is dirty, clean them if you
find them dirty.
❖
❖❖
❖ Cleaning the machine
Wipe the machine with a soft,
damp cloth. Then wipe it with a
dry cloth to remove the water.
Important
❒ Do not use chemical cleaner or or-
ganic solvent such as thinner or
benzene. If they get into the ma-
chine or melt plastic parts, a failure
might occur.
❒ Do not clean parts other than those
specified on this page. Such parts
should be cleaned by your service
representative.
Cleaning the Exposure Glass
Cleaning the Exposure Glass
Cover
Cleaning the Document
Feeder (ADF)
StellaC1a-EN-CopyF_V4_FM.book Page 61 Wednesday, September 12, 2001 4:03 PM
To Next Page
Loading...
