Copying
20
2
Loading Originals in the
Document Feeder (ADF)
Note
❒ The original might become dirty if
it is written with a pencil or similar
tools.
❒ Do not place any foreign objects on
the document feeder (ADF) or cov-
er it with your hand.
Reference
Regarding originals that the docu-
ment feeder (ADF) can handle, see
p.10 “Originals”.
A
AA
A
Adjust the guide to the original
size.
B
BB
B
Place the aligned originals face
up into the document feeder
(ADF).
1.
Limit mark
2.
Document guide
Note
❒ Do not stack originals above the
limit mark.
❒ To avoid a multi-sheet feed,
shuffle the originals before set-
ting them in the document feed-
er (ADF).
Placing Standard Size
Originals
Note
❒ When the copy paper size and the
original size differ, follow the steps
below.
A
AA
A
Press the {
{{
{Menu}
}}
} key.
B
BB
B
Press the 0
00
0 or 1
11
1 key to select "3.
Original Size", and then press the
{
{{
{OK}
}}
} key.
Note
❒ You can also enter this mode by
pressing the {
{{
{R/#}
}}
} key.
❒ When the bypass tray is select-
ed, the {
{{
{R/#}
}}
} key does not work
to enter this mode.
StellaC-EN-CopyF_V4_FM.book Page 20 Wednesday, July 4, 2001 11:23 AM
To Next Page
Loading...
