Where to Put Your Machine
61
5
Power Connection
WARNING:
WARNING:
CAUTION:
• When the main switch is in the Stand-by position, the optional anti-conden-
sation heaters are on. In case of emergency, unplug the machine's power cord.
• When you unplug the power cord, the anti-condensation heaters turn off.
• Make sure the plug is firmly inserted in the outlet.
• Voltage must not fluctuate more than 10%.
• The socket-outlet shall be installed near the equipment and shall be easily ac-
cessible.
• Only connect the machine to the power source described on the inside
front cover of this manual. Connect the power cord directly into a wall
outlet and do not use an extension cord.
• Do not damage, break or make any modifications to the power cord.
Do not place heavy objects on it. Do not pull it hard nor bend it more
than necessary. These actions could cause an electric shock or fire.
• Unplug the power cord from the wall outlet before you move the equip-
ment. While moving the equipment, you should take care that the pow-
er cord will not be damaged under the equipment.
• When you disconnect the power plug from the wall outlet, always pull the
plug (not the cable).
StellaC-EN-CopyF_V4_FM.book Page 61 Wednesday, July 4, 2001 11:23 AM
To Next Page
Loading...
