Reception Features
32
4
When There is No Paper of the Correct Size
If there is no paper in your machine that matches the size of a received message,
the machine will choose a paper size based upon the paper you have available.
For example, if your machine has A4L and 8
1
/
2
”×11”L installed and you re-
ceive a A5K size message, check the A5K column of the table below. The paper
size at the top has the highest priority. In this case, since 8
1
/
2
”×11”L is a higher
priority than A4L, the message is printed on 8
1
/
2
”×11”L.
❖
❖❖
❖ Priority Table
• KK and LL indicate that the message is split over two pages of paper with
the orientation and size shown.
Page Reduction Disabled
Reduction in Sub-scan Direction Enabled
Width or Length Priority Width
StellaCEN-advanced_V4_FM.book Page 32 Tuesday, July 17, 2001 1:01 PM
To Next Page
Loading...
