Ricoh Printer/Fax/Scanner/Copier Aficio 1515 - Accessing the User Tools (System Settings)

Accessing the User Tools (System Settings)
13
2
Accessing the User Tools (System Settings)
This section is for the key operators in
charge of this machine. You can
change or set the machine's default
settings.
Preparation
After using the user tools, be sure
to return to Copy mode.
The settings are not canceled even
if the main power switch is turned
off or the {
{{
{Clear Modes}
}}
} key is
pressed.
Reference
For information on Copy, Fax, and
Printer User Tools, see the appro-
priate reference manual.
A
AA
A
Press the {
{{
{User Tools/Counter}
}}
} key.
The User Tools Main Menu ap-
pears.
B
BB
B
Press the 0
00
0 or 1
11
1 key until “2.Sys-
tem Settings” is displayed, and
then press the {
{{
{OK}
}}
} key.
Note
❒
To view the total number of prints
made by the machine, see
p.14
“Printing the Counter Value”
.
❒ To switch the display language,
select “6. Language” and then
press the {
{{
{OK}
}}
} key. Press the 0
or 1 key until your desired lan-
guage is displayed, and then
press the {
{{
{OK}
}}
} key.
C
CC
C
Press the 0
00
0 or 1
11
1 key until your
desired menu is displayed, and
then press the {
{{
{OK}
}}
} key.
*1
Stella-EN-SysF_V4_FM.book Page 13 Wednesday, July 4, 2001 1:29 PM