Specifications
103
9
Limitation
❒ There may be a difference in the size of the image when it is printed at the des-
tination.
❒ If you place an original larger than A4, 8
1
/
2
"×11" on the exposure glass, only
an A4, 8
1
/
2
"×11" area is scanned.
Note
❒ Even if an original is correctly placed on the exposure glass or in the ADF, a
vertical margin of 3 mm (0.1") and a horizontal margin of 2 mm (0.8") may not
be sent.
-
--
-Maximum scan area
The maximum scan area is shown below:
• Memory Transmission: 216×1,200 mm/8
1
/
2
"×47" (W×L) from the ADF
• Immediate Transmission: 216×1,200 mm/8
1
/
2
"×47" (W×L) from the ADF
Note
❒ During Immediate Transmission, the length of the scanning range can be-
come narrower than 1,200 mm (47"), depending on the character size as
well as the settings on the destination machine.
• 210×297 mm/8
1
/
2
"×11" (W×L) (from the exposure glass)
StellaC2-AEcombine-F_FM.book Page 103 Tuesday, January 13, 2004 1:22 PM
To Next Page
Loading...
