Troubleshooting
50
3
D
DD
D
While pressing the release lever,
adjust the side fences.
E
EE
E
Push the metal plate down, and
then square the paper and load it
in the tray.
Important
❒ Do not stack paper over the lim-
it mark.
❒ Load paper so that the paper
touches the right side of the
tray, or misfeeds might occur.
Note
❒ Shuffle the paper before loading
it in the tray.
F
FF
F
Adjust the side and back fences to
the new paper size.
Important
❒ When loading small quantities
of copy paper, be careful not to
squeeze in the side fence too
much or paper will not be fed
properly.
G
GG
G
Push the paper tray in until it
stops.
Note
❒ Select the new paper size with
the User Tools. See p.51 “Select-
ing the Paper Size with the User
Tools”.
StellaC-EN-CopyF_V4_FM.book Page 50 Wednesday, July 4, 2001 11:23 AM
To Next Page
Loading...
