Ricoh Printer/Scanner Unit Type 8000 - Selecting the Sender by Entering the Registration Number

Delivering Scan Files
98
4
Selecting the Sender by Entering the Registration Number
You can select the sender by entering the registration number.
A Press [Sender Name].
B Press [Registration No.].
C Using the number keys, enter the three-digit registration number assigned
to the required destination folder.
If the entered number is less than five digits, press the {q} key after the last
number.
Example: To enter 006
Press the {6} key, and then press the {q} key.
D Press [OK].
By pressing [Change], you can change the selected destination.
Note
❒ For details about specifying [Short ID], see the manuals supplied with the
ScanRouter delivery software.