Ricoh Printer/Scanner Unit Type 8000 - Deleting a Program; Changing the Registered Program Name

Various Scan Settings
142
6
Deleting a Program
To delete a registered program:
A Press the {Program} key.
B Press [Delete].
C Press the number of the program you want to delete.
D Press [Yes].
The program is deleted, and the initial screen reappears after a moment.
Changing the Registered Program Name
To change the name of a registered program:
A Press the {Program} key.
B Press [Change Name].
C Press the number of the program whose name you want to change.
D Enter a new program name.
E Press [OK].
The new program name appears briefly, and then the initial screen reappears.