Setting of Original Feed Type
125
6
Batch, SADF
This section explains settings for scanning multiple originals in several batches.
To scan the originals as a single file, select [Batch].
To scan the originals individually in the ADF, select [SADF].
•If you select [Batch], scanning starts as soon as you place the additional origi-
nals and press the {Start} key. When all the originals have been scanned, press
the {q} key. If you select [Batch], regardless of the default settings, the ma-
chine waits until additional originals are placed.
•If [SADF] is selected, scanning starts as soon as you place additional originals
in the ADF. Select which operation the machine performs while waiting for
additional originals in [Wait Time for Next Original(s): SADF] under [Scanner Fea-
tures]. For details about [Wait Time for Next Original(s): SADF], see General Set-
tings Guide “Scan Settings”.
A Press [Original Feed Type].
B Select [Batch] or [SADF].
C Press [OK].
To Next Page
Loading...
