Basic Network TWAIN Scanner Operation
107
5
Basic Network TWAIN Scanner Operation
This section describes the basic operation for scanning with the network TWAIN
scanner.
Important
❒ To use the network TWAIN scanner, a TWAIN-compliant application, such
as DeskTopBinder and the TWAIN driver must be installed on the client com-
puter.
The following procedure uses Windows XP and DeskTopBinder Lite by way of
example.
A On the [Start] menu, point to [Program], point to [DeskTopBinder], and then
click [DeskTopBinder].
B On the [Tools] menu, click [Scanner Settings...].
C Click [Select Scanner Driver...].
D Select the name of the machine you want to use in the list, and then click
[Select...].
E Click [OK].
F Place originals.
G On the [File] menu, point to [Add Document], and then click [Scan...] to display
the Scanner Control dialog box.
The Scanner Control dialog box and DeskTopBinder viewer will appear.
H Make settings according to such factors as the type of original, type of scan-
ning, and orientation of the original.
For details, see the TWAIN driver Help.
I In the Scanner Control dialog box, click [Scan...].
Depending on the security setting, if you press [Scan...], a dialog box for en-
tering the user name and password may appear.
If there are more originals to be scanned, place the next original, and then
click [Scan...].
If there are no more originals to be scanned, click [Complete].
J On the [File] menu of the DeskTopBinder viewer, click [Exit].
K Enter the file name, and then click [OK].
The DeskTopBinder viewer closes and the image is stored in DeskTopBinder
Lite.
To Next Page
Loading...
