7
Handling the machine's interior
This section explains safety precautions about handling the machine's interior.
R WARNING:
R CAUTION:
Handling the machine's supplies
This section explains safety precautions about handling the machine's supplies.
R WARNING:
• To avoid hazardous electric shock or laser radiation exposure, do not
remove any covers or screws other than those specified in this man-
ual.
• The fusing section of this machine might be very hot. Caution should be tak-
en when removing misfed paper.
• The inside of the machine could be very hot. Do not touch the parts with a
label indicating “hot surface”. Otherwise, an injury might occur.
• During operation, rollers for transporting the paper and originals revolve. A
safety device is being installed so that the machine can be operated safely.
But take care not to touch the machine during operation. An injury might
occur.
• Fire and breakdown can result from heavy accumulation of dust inside this
machine. Consult your service representative for details about and charges
for cleaning the machine's interior.
• Do not incinerate used toner or toner containers. Toner dust might ig-
nite when exposed to an open flame. Dispose of used toner containers
in accordance with local regulations.
• Do not incinerate the photoconductor unit. Toner dust might ignite
when exposed to an open flame. Dispose of the used photoconductor
unit in accordance with local regulations.
• Do not incinerate spilled toner or used toner. Toner dust might ignite
when exposed to an open flame.
• Do not store toner, used toner, or toner containers in a place with an
open flame. The toner might ignite and cause burns or a fire.
• Dispose of the used toner container in accordance with the local reg-
ulations.
To Next Page
Loading...
Need help?
General
