Switching to the Scan to Folder Screen
45
2
Switching to the Scan to Folder Screen
This section explains how to switch to the Scan to Folder screen.
If the E-mail screen is being displayed, press [Folder] to switch to the Scan to
Folder screen.
If the network delivery scanner screen is being displayed, switch to the Scan to
Folder screen as follows:
A Press [Delivery Dest.].
The E-mail screen or Scan to Folder screen appears.
B If the E-mail screen appears, press [Folder].
The Scan to Folder screen appears.
Note
❒ You cannot switch from the network delivery scanner screen while deliv-
ery destinations are being specified. To clear the specified destination, dis-
play the destination in the destination field of the network delivery
scanner screen, and then press the {Clear / Stop} key.
To Next Page
Loading...
