Various Scan Settings
120
6
Adjusting Image Density
This section explains how to adjust image density.
To adjust image density, press [W] or [V], at the left and right of [Auto Density].
These buttons increase or decrease the image density in single increments up to 7.
Selecting [Auto Density] corrects scanning density to improve resolution of paper
types such as non-white paper like newspaper or transparent originals. For de-
tails, see General Settings Guide.
Note
❒ If you select [Text], [Text / Line Art], or [Text / Photo] for [Scan Type] under [Scan
Settings], [Auto Density] is automatically selected.
To Next Page
Loading...
