Getting Started
30
1
Turning On the Power
This section discusses how to turn on/off the power.
❖ Power supply
This machine has two power switches: Operation switch and main power
switch.
• Operation switch (right side of the control panel)
Press to activate the machine. When the machine has finished warming up,
you can make copies.
• Main power switch (left side of the machine)
Turning off this switch will completely turn off power to the machine.
Note
❒ This machine automatically enters Energy Saver mode or turns itself off if you
do not use it for a certain period. See “Timer Settings”, General Settings
Guide.
Turning On the Main Power
Turn on the main power as follows:
A Make sure the power code is firmly plugged into the wall outlet.
B Open the switch cover and turn on the main power switch.
The main power indicator turns on.
Note
❒ Do not turn off the main power immediately after it has been turned on.
Otherwise it may result in damage to the hard disk or memory, leading to
the malfunctioning of the machine.
❒ When the message “
Functional problem detected. Press [Restart]
after the current process. Repeat settings after the machine
has restarted.
” is displayed, follow the instructions and press [Restart]
at the bottom right-hand corner of the screen after the process is completed.
ANP085S
To Next Page
Loading...
Need help?
General
