Ricoh Printer/Scanner Unit Type 8000 - Using a Registration Number to Specify a Sender Name

Sending Scan Files by E-mail
28
1
Using a Registration Number to Specify a Sender Name
Select the sender from the destination list according to the registration number.
A Press [Sender Name].
B Press [Registration No.].
C Using the number keys, enter the five-digit registration number assigned
to the required destination folder.
If the entered number is less than five digits, press the {q} key after the last
number.
Example: To enter 00006
Press the {6} key, and then press the {q} key.
D Press [OK] twice.
By pressing [Change], you can change the selected destination.