Troubleshooting When Using the Printer Function
54
4
Messages Displayed When Using the
Printer Function
This section describes the principal messages that appear on the panel display.
If a message not described here appears, act according to the message.
Reference
Before turning the main power off, see “Turning On the Power”, About This
Machine.
Status Messages
This section describes the machine status messages.
Message Problem
Ready
This is the default ready message. The machine is ready
for use. No action is required.
Printing...
The machine is printing. Wait a while.
Waiting...
The machine is waiting for the next data to print. Wait a
while.
Offline
The machine is offline. To start printing, switch the ma-
chine online by pressing {Online} key.
Please wait.
The machine is preparing the development unit. Wait a
while.
Resetting job...
The machine is resetting the print job. Wait until
“
Ready” appears on the display panel.
Setting change...
The machine is setting changing. Wait a while.
Hex Dump Mode
In the Hex Dump mode, the machine receives data in
hexadecimal format. Turn off the machine after printing,
and then turn back on.
To Next Page
Loading...
Need help?
General
