Sending Scan Files by E-mail
14
1
Basic Operation for Sending Scan Files by
E-mail
This section describes the basic operation for sending scan files by e-mail.
A Make sure that no previous settings remain.
If a previous setting remains, press the {Clear Modes} key.
B If the network delivery scanner screen or Scan to Folder screen appears,
switch to the E-mail screen.
For details, see “Switching to the E-mail Screen”.
C Place originals.
D If necessary, press [Scan Settings] to specify scanner settings such as resolu-
tion and scan size.
For details, see “Various Scan Settings”.
E If necessary, specify the scanning density.
For details, see “Adjusting Image Density”.
F If necessary, press [Original Feed Type] to specify settings such as original
orientation.
For details, see “Setting of Original Feed Type”.
To Next Page
Loading...
