Various Scan Settings
138
6
F In [Password], press [Enter].
G Enter a password, and then press [OK].
The password entered here will be required to change the security settings of
the PDF file.
H Enter then password again, and then press [OK].
I Select the security permission setting.
You can specify the following security settings:
• Print permission: [Prohibit], [Allow], or [Low Resolution Only]
• Editing permission: [Prohibit] or [Allow]
• Copying or extracting content permission: [Prohibit] or [Allow]
J Press [OK] twice.
Note
❒ The [Password] and [Master Password] cannot be the same.
❒ You can enter up to 32 alphanumeric characters for a Master Password.
❒ If [40 bit] is selected as the PDF encryption level, you cannot select [Low Res-
olution Only] as the print permission.
To Next Page
Loading...
