Specifying E-mail Destinations
19
1
If the target destination does not appear, take one of the following steps:
• Display the destination by selecting its initial letter from the title
• Display the destination by pressing [U] or [T]
Note
❒ Depending on the security setting, some destinations may not appear in
the destination list.
Selecting destinations by entering the registration numbers
Select the destination from the machine’s address book using its registration
number.
A Press [Reg. No.].
B Using the number keys, enter the five-digit registration number assigned
to the required destination folder.
If the entered number is less than five digits, press the {q} key after the last
number. Example: To enter 00003 Press the {3} key, and then press the {q}
key.
C Press [OK].
By pressing [Change], you can change the selected destination.
To Next Page
Loading...
