Copier:
Document Server:
Printer:
Scanner:
Facsimile:
Quick Reference Fax Guide
The Journal is printed automatically after every 50
communications. You can also request a Journal at any
time, by following below procedure.
A Press [Change TX / Info].
B Select [Print Journal].
C Select the printing method:
- [All]
- [Print per File No.]
- [Print per User]
D Press the {Start} key.
E Press [Exit] twice.
Please see the <Facsimile Reference> Operating Instructions:
- SUB/SEP Codes (1. Transmission)
Privacy can be protected when faxing with a SUB/SEP
Code, since only people who know the SUB/SEP Code
can receive or print the fax document.
-
Printed reports (4. Changing/Confirming Communication Information)
Inform you if a fax has been saved, sent, or failed to be transmitted.
-
LAN-Fax features - Sending a fax from a computer (6. Fax via Computer)
A Specify a transmission mode:
• Memory Transmission, or
• Immediate Transmission (selected by pressing
[Immed. TX])
B Place the original.
• Exposure glass
(face down)
• Auto Document
Feeder (face up)
C Make the scan settings you require.
D Specify a destination.
E Press the {Start} key.
If you choose Memory Transmission, you can
send to
more destinations at once. To do this, after
step 4, press:
- [Add] and specify destinations
- the {Start} key
To send an Internet Fax,
press [Internet Fax] to
switch the transmission
type to Internet Fax.
This button needs to be
selected as first step
Using this function, you can instruct the machine to send the
fax at a later time via Memory Transmission. Advantage: you
can take advantage of off-peak telephone charges, without
being at the machine.
A Place the original, and then select the scan settings you require.
B Press [TX Mode].
C Press [Send Later].
D Enter the time (24 hour format) using the
number keys, and then press [OK].
E Press [OK].
F Specify a destination, and then press the {Start} key.
Memory + Immediate
Before the original is scanned = before pressing the {Start} key:
A Press the {Clear Modes} key.
While the original is being scanned = after pressing the {Start} key:
A Press the {Clear/Stop} key.
Memory
While the original is being transmitted:
A Press the {Clear/Stop} key.
B Select the file you want to cancel.
C Press [Stop Transmission], and then press [OK].
D Press [Exit].
Before the transmission is started:
A Press [Change TX / Info].
B Press [Check / Stop Transmission File].
C Select the file you want to cancel.
D Press [Stop Transmission], and then press [OK].
E Press [Exit] twice.
cPlease put this guide above your machineg
cPlease put this guide above your machineg
Chapter references in this guide refer to the bundled OI CD; Facsimile Reference and General Settings Guide.
Copyright © 2007 Printed in Japan AE AE B819-7605
1. Confidential File indicator
2. Communicating indicator
3. Receiving File indicator
4. {User Tools/Counter} key
5. Display panel
6. {Clear Modes} key
Press to clear the current settings.
7. {Program} key
Press to select the program mode.
8. Main power indicator
9. Operation switch
10. {Simplified Display} key
11. {Start} key
12. {#} key (enter key)
Registers entered numbers or settings.
A Press [Store File].
B Select [Send & Store].
C Set the user name, file name, and password
as necessary, and then press [OK].
D Specify a destination, and then press the
{Start} key.
To send a fax from Document Server:
A Press [Select Stored File].
B Select the documents to be sent, and then
press [OK].
C Specify a destination, and then press the
{Start} key.
A Press the {User Tools/Counter} key.
B Press [System Settings].
C Press [Administrator Tools].
D Press [Address Book Management].
E Check that [Program / Change] is selected.
F Press [New Program].
G Press [Change] and set user’s information, press [OK].
H Press [Fax Dest.].
I Press [Change] and enter the fax number using the number
keys, press [OK] under Fax Destination.
J Press [OK].
K Press [Exit].
L Press the {User Tools/Counter} key.
M You will get a message ‘Destination list / machine settings are
updated...’. Press [Exit].
How to fax to Document Server...
How to program a Destination key…
(General Settings Guide
7. Registering Addresses
and Users for Facsimile/
Scanner Functions)
(1. Transmission)
How to send a fax...
(2. Other
Transmission
Features)
How to send at a specific time (Send Later)
Advanced Features Fax
How to print the Journal...
(4. Changing/Confirming
Communication Information)
How to cancel a transmission...
(1. Transmission)
(5. Storing a
Document)
13. {Clear/Stop} key
14. Number keys
15. {Facsimile} key
Press to switch to the facsimile mode.
16. Error indicator
17. Function keys
Standard available:
☺
You can also print and scan on this machine!
Please ask your sales person for these options.
â–¼
B8197605
Print_MartiniC35_FaxQR-AE.p65 07.10.11, 10:451
To Next Page
Loading...
Need help?
General
