Ricoh PRIPORT JP1210 - Clearing Misfeeds; X + ORIGINAL JAM. REMOVE ORIGINAL

What to do If Something Goes Wrong
84
5
x Clearing Misfeeds
Important
❒ When clearing misfeeds, do not turn off the main switch. If you do, your print
settings are cleared.
-
--
-
After clearing misfeeds
Press the
{
Clear Modes/Energy Saver
}
key to reset the error indicators.
“
x
xx
x
” + “ORIGINAL JAM. REMOVE ORIGINAL”
Note
❒ These indicators will light when your machine is equipped with the optional
document feeder.
A
Press the ADF unit open lever and open the ADF unit.
TSLP016E
SilverV-gb.book Page 84 Monday, May 15, 2000 3:32 PM