xiii
TABLE OF CONTENTS
1.Operation
Printing Paper............................................................................................ 1
Originals..................................................................................................... 2
Preparation for Printing............................................................................ 3
Loading Paper............................................................................................... 3
Setting Up the Paper Delivery Tray............................................................... 4
Standard Printing ...................................................................................... 5
Restoring Paper Feed and Paper Delivery Trays ................................... 7
Energy Saver Mode — Saving Energy..................................................... 8
Adjusting the Print Image Position.......................................................... 9
Shifting the Print Image Position Forward or Backward................................ 9
Shifting the Print Image Position to the Right or Left .................................. 10
Adjusting the Print Image Density......................................................... 11
Before Making a Master.............................................................................. 11
After Making a Master................................................................................. 11
Tint Mode—Halftone Printing................................................................. 12
Fine Mode—Making Clear Prints............................................................ 13
Changing the Printing Speed................................................................. 14
Stopping the Machine during the Multi-print Run................................ 15
When You Want to Stop the Machine during the Multi-print Run and
Print the Next Original ............................................................................... 15
When You Want to Change the Number of Prints Entered or Check the
Completed Prints....................................................................................... 15
Preset Reduce/Enlarge—Reducing and Enlarging Using Preset Ratios ... 16
Centre/Edge Erase—Erasing centre and Edge Margins...................... 18
Edge Erase—Erasing Edge Margins...................................................... 20
Paste Shadow Erase—Erasing the Shadow of Pasted Originals........ 22
Printing on Thick or Thin Paper............................................................. 23
Pressure Lever Position.............................................................................. 23
Selecting Original Type........................................................................... 24
Economy Mode—Saving Ink .................................................................. 25
Auto Cycle—Printing from Several Originals at Once......................... 26
Class Mode—Group Printing from the Same Original......................... 28
Memory Mode—Group Printing from Different Originals.................... 30
Combine—Combining 2 Originals onto One Print ............................... 33
Skip Feed Printing................................................................................... 37
Program—Storing Your Print Settings in Memory............................... 38
SilverV-gb.book Page xiii Monday, May 15, 2000 3:32 PM
To Next Page
Loading...
