Ricoh PRIPORT JP1210 - Protecting a Program

Operation
40
1
E
Press the {
{{
{
Start
}
}}
} key.
Protecting a Program
If you want to prevent someone from
writing over your program, do the
following procedure.
A
While holding down the {
{{
{
Clear/
Stop
}
}}
} key, press the {
{{
{
Program
}
}}
}
key.
B
Enter “1” with the number keys.
C
Press the {
{{
{q
qq
q}
}}
} key.
Note
❒ The numbers of the programs
which are not protected will be
displayed in the guidance dis-
play.
D
Select the program number you
want to protect with the number
keys.
E
Press the {
{{
{q
qq
q}
}}
} key.
TSLS012E
TSLS01ME
TSLS01JE
TSLS011E
TSLS01JE
SilverV-gb.book Page 40 Monday, May 15, 2000 3:32 PM