Optional Functions
52
2
Colour Printing Using the Optional Colour
Drum
Colour drum units (red, blue, green,
brown, yellow, purple, navy, ma-
roon, orange, teal and gray) are avail-
able as options in addition to the
standard black unit. For making col-
our prints, a separate drum unit is
necessary for each colour.
Making Colour Prints
A
Make sure that the COLOUR is
shown in the guidance display.
B
Press the {
{{
{
Start
}
}}
} key.
C
Check the image position of the
trial or proof print.
Note
❒ If the image position is not cor-
rect, adjust it using the {
Image
Position
} keys (see ⇒ P.9 “Shift-
ing the Print Image Position For-
ward or Backward”) or the side
tray fine adjusting dial (see ⇒
P.10 “Shifting the Print Image Po-
sition to the Right or Left”).
D
Make your prints.
Changing the colour Drum
Unit
A
Open the front door.
B
Lift the lock lever until it locks in
position.
GRCOPR0E
TSLS012E
TSLH01IE
TSLH01KE
SilverV-gb.book Page 52 Monday, May 15, 2000 3:32 PM
To Next Page
Loading...
