57
3. Service Program Mode
Accessing Service Programs
The service programs can be set by
following this procedure.
Reference
For the service program menu, see
⇒ P.59 “Service Program Menu”.
A
Press the {
{{
{
Clear Modes/Energy Sav-
er
}
}}
} key.
B
Hold down the {
{{
{
Clear/Stop
}
}}
} key
for at least 3 seconds.
The SP-mode display appears on
the guidance display.
Note
❒ If you press the wrong key, try
pressing the above keys from
the beginning.
C
With the number keys, enter the
desired service program number
(SP No.).
Reference
For the SP No., see ⇒ P.59
“Service Program Menu”.
When you want to leave the
service program mode
A Press the {
{{
{
Clear Modes/Energy
Saver
}
}}
} key.
Reference
If you want to change the set-
tings of a selected service
program, see ⇒ P.58 “Chang-
ing the Settings of Service Pro-
grams”.
TSLS01AE
TSLS011E
SilverV-gb.book Page 57 Monday, May 15, 2000 3:32 PM
To Next Page
Loading...
