Changing the Settings of Service Programs
59
3
When you want to leave the service program mode
A Press the {
{{
{
Clear Modes/Energy Saver
}
}}
} key.
Service Program Menu
SP No. Mode Function
5 Tape Marker Off Specifies whether the optional tape dispenser can be
used.
Note
❒ Default: 0
❒ Adjustment value: 0: No 1: Yes
10 Min. Print Specifies the minimum number of prints that can be
input with the number keys.
Note
❒ Default: 0
❒ Adjustment value: 0 to 9999
11 Max. Print Specifies the maximum number of prints that can be
input with the number keys.
Note
❒ Default: 0
❒ Adjustment value: 0 to 9999
SilverV-gb.book Page 59 Monday, May 15, 2000 3:32 PM
To Next Page
Loading...
