Maintaining Your Machine
113
6
Maintaining Your Machine
To maintain high print quality, clean
the following parts and units regular-
ly.
Main Frame
Exposure Glass
A
Lift the platen cover or document
feeder.
B
Clean the exposure glass with a
damp cloth and wipe it with a dry
cloth.
Note
❒ If you do not clean the exposure
glass, marks on the glass will be
printed.
Platen Cover
A
Lift the platen cover.
B
Clean the platen cover with a
damp cloth and wipe it with a dry
cloth.
Note
❒ If you do not clean the platen
cover, marks on the cover will
be printed.
Paper Feed Roller (paper feed tray)
A
Wipe off the paper dust on the pa-
per feed roller with a damp cloth,
then wipe it with a dry cloth.
Note
❒ If you do not clean the paper
feed roller, paper misfeeds tend
to occur.
TSLH019E
TSLH015E
TSLH017E
SilverV-gb.book Page 113 Monday, May 15, 2000 3:32 PM
To Next Page
Loading...
