Optional Functions
44
2
Originals
Setting the following originals in the document feeder might cause original mis-
feeds or damage to the originals.
Set these originals on the exposure glass.
• Originals heavier than 90g/m
2
, 23.9 lb (when setting a stack of originals)
• Originals lighter than 50g/m
2
, 13.3 lb (when setting a stack of originals)
• Originals heavier than 120g/m
2
, 31.9 lb (when setting one original at a time)
• Originals lighter than 40g/m
2
, 10.6 lb (when setting one original at a time)
• Carbon coated originals
• Damaged originals
• Originals with glue on them
• Originals perforated for ring binders
• Book originals
• Originals written with a pencil or ball-point pen
• Originals smaller than 148mm × 105mm, 5.8" × 4.1"
• Originals larger than 257mm × 364mm, 10.2" × 14.4"
• Folded, curled, creased originals
• Bound, stapled, or clipped originals
• OHP transparencies
• Translucent paper
• Pasted originals
Note
❒ If you use paste-up originals, make sure the pasted parts hold firmly to the
base sheet and press the {
Paste Shadow Erase
} key. If the thickness of the paste-
up original is more than 0.1mm, and the space between the pasted parts is less
than 2mm, 0.08", a shadow might appear on the prints.
❒ The first 5mm, 0.2", of the leading edge cannot be printed. Make sure the lead-
ing edge margin is at least 5mm, 0.2".
❒ a: 5mm, 0.2"
Original Print
a
SilverV-gb.book Page 44 Monday, May 15, 2000 3:32 PM
To Next Page
Loading...
