Ricoh PRIPORT JP1210 - Adjusting the Print Image Density; Before Making a Master; After Making a Master

Adjusting the Print Image Density
11
1
Adjusting the Print Image Density
You can adjust the print image densi-
ty to suit your needs. There are two
ways:
❖
❖❖
❖ Before Making a Master
Adjust the image density using the
{
Image Density
} key.
❖
❖❖
❖ After Making a Master
Adjust the image density using the
{W
WW
W} or {V
VV
V} key.
Before Making a Master
A
Use the {
{{
{
Image Density
}
}}
} key before
pressing the {
{{
{
Start
}
}}
} key.
After Making a Master
A
Press the {
{{
{W
WW
W}
}}
} or {
{{
{V
VV
V}
}}
} key. To in-
crease the speed, press the {
{{
{V
VV
V}
}}
}
key. To reduce the speed, press
the {
{{
{W
WW
W}
}}
} key.
Note
❒ The faster the printing speed be-
comes, the lighter the printing
density is. If you want darker
prints, decrease the printing
speed.
SilverV-gb.book Page 11 Monday, May 15, 2000 3:32 PM