Ricoh PRIPORT JP1210 - X +MASTER EJECT JAM. REMOVE JAMMED MASTER

What to do If Something Goes Wrong
94
5
• When the leading edge margin of the original is less than 5mm, 0.2" or there
is a solid image on the leading edge, insert the original with the widest mar-
gin first or make a leading edge margin by making a copy.
“
x
xx
x
” +“MASTER EJECT JAM. REMOVE JAMMED MASTER”
A
Check where the misfed master is. Remove the misfed master as follows.
When a master misfeed occurs in the master eject section
A Pull out the master eject box.
GRLEAD0E
SilverV-gb.book Page 94 Monday, May 15, 2000 3:32 PM