Operation
8
1
Energy Saver Mode — Saving Energy
If you do not operate the machine for a certain period after printing, or when you
press and hold the {
Clear Modes/Energy Saver
} key for three seconds, the panel
display turns off and the machine enters Energy Saver mode. When you press
the {
Clear Modes/Energy Saver
} key again, the machine returns to the ready con-
dition. In Energy Saver mode, the machine uses less electricity.
See “Auto Energy Saving” ⇒ P.59 “Service Program Menu”.
SilverV-gb.book Page 8 Monday, May 15, 2000 3:32 PM
To Next Page
Loading...
