What to do If Something Goes Wrong
96
5
C Pull the master out of the master clamp.
D Re-insert the drum unit until the drum unit locks in position and put the
lever back in place.
“
x
xx
x
” +“DELIVERY JAM. REMOVE JAMMED PAPER”
A
Remove the misfed paper.
Note
❒ Make sure that the paper delivery end plate and paper delivery side plates
are in the proper position.
❒ If a jam occurs with the current printing speed, reduce the paper delivery
speed.
1
22
TSLH031E
TSLH028E
SilverV-gb.book Page 96 Monday, May 15, 2000 3:32 PM
To Next Page
Loading...
