Changing the Settings of Service Programs
61
3
25 Clear 2 In 1 By default, when master making is finished in Com-
bine Copies mode, this mode stays selected for the
next master making.
If you want master making turned off, select “1”.
Note
❒ Default: 0
❒ Adjustable value: 0: No 1: Yes
❒ Even if you select “1” in this mode, Combine Cop-
ies mode is not cleared when the next original are
set in the optional document feeder.
❒ For details about Combine Copies, see ⇒ P.33
“Combine—Combining 2 Originals onto One Print”.
29 Pht Backgrnd Cor-
rect
When you make prints in Photo or Letter/Photo
mode, the background of the prints might become
dirty. You can prevent this using this function.
Note
❒ Default: 0
❒ Adjustment value: 0: No 1: Yes
40 Original Specifies the image mode at power on.
Note
❒ Default: 0
❒ Adjustment value:
• 0: Letter mode
• 1: Letter/Photo mode
• 2: Photo mode
41 Image density Specifies the image density at power on.
Note
❒ Default: 1
❒ Adjustment value:
•0: Light
• 1: Standard
•2: Dark
•3: Darker
SP No. Mode Function
SilverV-gb.book Page 61 Monday, May 15, 2000 3:32 PM
To Next Page
Loading...
