Related Troubleshooting
• Horizontal Streaks
• Uneven Density
• Mottling
For detailed procedure, see the Troubleshooting manual.
Paper Transfer Belt
1331 [Motor Speed] [Speed Adjustment] 02: [Paper Transfer Belt]
Function
Adjusts the paper transfer belt speed.
When to use
If a problem such as side-to-side image magnification misalignment and mottling on black half-tone
parts occurs in the printed image because of the speed difference relative to the intermediate
transfer belt, the problem may be solved by adjusting the line speed.
Related Troubleshooting
• Horizontal Streaks
• Mottling
• Creases / Wavy Streaks
For detailed procedure, see the Troubleshooting manual.
Trans-Fusing Transf Belt /Fusing Belt
1331 [Motor Speed] [Speed Adjustment] 03: [Trans-Fusing Transf Belt 1]
1331 [Motor Speed] [Speed Adjustment] 04: [Trans-Fusing Transf Belt 2]
1331 [Motor Speed] [Speed Adjustment] 05: [Fusing Belt]
Function
• Trans-Fusing Transf Belt
Adjusts the rotation speed of the fusing belt.
• Fusing Belt
Adjusts the speed of the fuser motor.
Adjust the speed in steps of 0.5% to "+" if creases or scratches occur due to slack paper, and
in steps of 0.5% to "-" if the paper is bent or the printed image is stretched.
When to use
Slow fusing speed causes the sheets to slacken before entering the fusing nip and scatter the toner
image. In such case, increase the fusing belt rotation speed.
3. Details of Detailed Settings
52
To Next Page
Loading...
