If such image degradation occurs, it can be resolved by increasing the fusing belt line speed. It is
also necessary to change the setting (-0.5% from that for the SRA3 or smaller size paper) on
[Detailed settings] for custom paper when loading banner sheets.
Related Troubleshooting
• White Spots
For detailed procedure, see the Troubleshooting manual.
Process Speed Setting
1331 [Motor Speed] [Speed Adjustment] 06: [Process Speed Setting]
Function
Adjusts the print speed (paper feed speed).
Normally, use [Standard Speed]. If the fusibility cannot be resolved even by adjusting the
temperature setting to "+", use [Low Speed].
When to use
Use this to solve problems such as insufficient fusing, wrinkles in thin paper, and image quality
degradation.
Related Troubleshooting
• Horizontal Streaks
• Uneven Gloss
• River mark
• White Spots
• Creases / Wavy Streaks
For detailed procedure, see the Troubleshooting manual.
Paper Feed Interval
1331 [Motor Speed] [Speed Adjustment] 07: [Paper Feed Interval]
Function
Adjusts the speed of all the motors related to paper transport.
When to use
Problems such as granular toner clotting (black spots) may be solved by executing CPM
adjustment.
Related Troubleshooting
• Horizontal Streaks
For detailed procedure, see the Troubleshooting manual.
Paper Feed/Delivery
53
To Next Page
Loading...
