5816 069 CERT Up ID The ID of the request for certification.
5816 083 Firm Up Status Displays the status of the firmware update.
5816 084 Non-HDD Firm Up
This setting determines if the firmware can be updated, even
without the HDD installed.
0: Not allowed update
1: Allowed update
5816 085 Firm Up User Che(ck)
This SP setting determines if the operator can confirm the
previous version of the firmware before the firmware update
execution. If the option to confirm the previous version is
selected, a notification is sent to the system manager and
the firmware update is done with the firmware files from the
URL.
5816 086 Firmware Size
Allows the service technician to confirm the size of the
firmware data files during the firmware update execution.
5816 087 CERT: Macro Ver. Displays the macro version of the @Remote certification.
5816 088 CERT: PAC Ver. Displays the PAC version of the @Remote certification.
5816 089 CERT: ID2Code
Displays ID2 for the @Remote certification. Spaces are
displayed as underscores (_). Asteriskes (***) indicate that
no @Remote certification exists.
5816 090 CERT: Subject
Displays the common name of the @Remote certification
subject. CN = the following 17 bytes. Spaces are displayed
as underscores (_). Asterisks (***) indicate that no DESS
exists.
5816 091 CERT: SerialNo.
Displays serial number for the @Remote certification.
Asterisks (***) indicate that no DESS exists.
5816 092 CERT: Issuer
Displays the common name of the issuer of the @Remote
certification. CN = the following 30 bytes. Asteriskes (***)
indicate that no DESS exists.
5816 093 CERT: Valid Start
Displays the start time of the period for which the current
@Remote certification is enabled.
5816 094 CERT: Valid End
Displays the end time of the period for which the current
@Remote certification is enabled.
5816 200
Manual Polling
Printer Engine Service Mode
105
To Next Page
Loading...
