PSU, HVPS
1. Right cover (* Right Cover)
2. Fusing unit (*Fusing Unit)
3. PSU cover [A] ( x 2)
4. PSU assembly [B] ( x 7, all connectors)
5. High voltage supply board [A] ( x 4)
6. 230-volt machine only: Choke coil [B] ( x 2, x 1, x 3)
7. PSU [C] ( x 5)
• The screw [D] is different from other four screws.
• Route the PSU fan harness as shown the picture below, when reinstalling the PSU assembly.
PSU, HVPS
51
To Next Page
Loading...
