By-pass Tray
1. Left Cover (* Left Cover)
2. Front Cover (* Front Cover)
3. Remove the AIO
4. Paper guide [A] ( x 2)
5. Actuator [B]
6. Clutch ( x1) [C]
7. By-pass feed roller [D]
When reinstalling the paper guide.
1. Set the paper guide on the bushing.
2. Install the right part of the actuator on the paper guide.
3. Install the left part of the actuator in the machine.
4. Install the paper guide.
5. Check that the actuator moves smoothly and swings freely.
3. Replacement and Adjustment
44
To Next Page
Loading...
